C-FKO-90-50 Freon air for ventilation systems
Application C air cooler freon - FKO - 90 - 50
Freon air C - FKO designed for air cooling in channel systems of conditioning and ventilation. Air cooler can be used for air dehumidification.
Channel cooler is mounted directly in rectangular ducts.
The design of the air cooler channel
The construction involves the installation of the air cooler: freon heat exchanger, eliminator and tray within the housing.
Cooler housing is made of galvanized steel.
Freon heat exchanger made of copper tubing, staggered, and aluminum fins. From the water cooler is different design distribution unit ( "spider"), and the specificity of the refrigerant inlet.
Collectors freon heat exchanger made of copper tubes.
Joining pipelines, a supply refrigerant is performed by soldering.
The refrigerant in heat exchangers direct cooling channel may be used chlorofluorocarbon refrigerants R22, R407C, R410A et al.
Delivered heat exchangers are filled with inert gas which must be removed when connection to a refrigeration circuit.
Droplet represents a set of special plastic plates, effectively trapping condensate, and collecting it in the tray located at the bottom of the cooler housing.
The tray is provided with a vent pipe for condensate drain.
When installing the air cooler freon C - FKO - 90 - 50 you must ensure that it is horizontal.
When placing the cooler near the ceiling is necessary to provide service access.
To protect the refrigerant before it set a filter in the ventilation system is recommended.